Heartbeat of Hohm Tech
PERFORMANCE | CAPACITY | SAFETY
Advanced Battery Chemistry
We emphasized on safety while focused on chart-topping performance.
TIRED OF COUNTERFEITS? So are we. Hohm Tech cells come standard with UAC (unique authenticity code) or are equipped with the proprietary embossed power guard.
18650: HOHM LIFE4 | WORK2 | ALONE
18650 (NEW): HOHM DEPOT | MEGA
20700: SHERLOCK2 HOHM
21700: HOHM RUN | RUNXL
26650: HOHM GROWN2
Specifications
Started with raw materials sourced from multiple renowned providers
Collaboration & guidance from the source of it all, IC (aka: Indonesia Chemistry)
Lowered internal resistance by a multitude of various internal modifications (used UHPAI for cathode tag, shortened cathode tag, among other mods)
After 1000’s of trials and tests, we zero’d in on the perfect combination of what we call PPLS (Price, Power, Longevity, & Safety)
Expanded our safety efforts by placing a stronger bitumen compound Poly Seal in every battery
2547mAh | 25.3A CDR | 35.8A @ 80oC cut-off
Can be charged at a tested/proven 3.82A rating: Yes, 3.82, as in THREE POINT EIGHT TWO. It is possible, tested, proven, and approved**
Phenomenal amperage delivery to drive power demanding devices
Purest form of Li-NMC (Nickel [Ni], Manganese [Mn], Cobalt [Co]) used to date
Exceeds all previous designs and chemistry results with greater amperage and capacity
EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential
Updated Poly Seal: Enhances security of seal & proper operation
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
Ahead of schedule chem bonding to U-Mn specifications: one of many processes conducted to achieve documented specs
NEW chemical stimulation and unity process achieves greater purity: Cycle Life is increased to 69% nominal average of original capacity
NEW meld process over 7kHz: results in charge rate capable of 3.82A
Ahead of schedule chem bonding to  Li-Mn specifications
Phenomenal amperage-to-capacity ratio to drive power demanding devices
NEW HT 5-brace embossed top to alleviate impostures from distributing fakes in the industry
Many proprietary processes conducted to achieve documented specs
3309mAh | 15.3A CDR | 19.6A @ 80oC cut-off
Can be charged at a tested/proven 4.14A rating: Yes, 4.14, as in FOUR POINT ONE FOUR. It is possible, tested, proven, and approved**
NEW NiMnCo Meld over 7kHz: process increases charging rate to 4.14A (1.25C) compared to standard 0.5C – 1C rates of Li-NMC formulation
Utilizing industry-unique QSP Li-NMC (4x raw compound wash)
Exceeds all previous designs and chemistry results with greater amperage-to-capacity ratio in 18650 format
EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential
Purpose-built to take on both high amperage and high capacity tasks simultaneously. Utilizing proprietary structure, top cap, and QSP chemistry in the Li-NMC family. More amps ~ cooler temps ~ even safer.
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
3005mAh | 16.8A CDR | 22.5A @ 80oC cut-off
Can be charged at a tested/proven 3.60A rating with minimal impact to degradation
Amperage delivery at sustained voltages ensures powering relevant loads
Recalibrated chemistry formula comprised of DSP compounds
Progressive amperage-to-capacity and capacity-to-weight
EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential
Equipped with the UPS sealing compounds as an extended assurance of proper operation and performance
DSP (Dual Stripping Process) formula and selection of raw chemistry achieves a greater cycle life than any previous Hohm Tech cell
2nd Gen Cathode Tag integration to promote reduction in internal resistance
NEW slurry stir process enables greater consistency and minimizes cell-to-cell variation
Proprietary ACT (Anti-Counterfeit Top) embossment on every Hohm Tech cell
UPDATED test procedures validate greater cycle life for the Hohm Tech DSP cells
2505mAh | 22A CDR | 29.5A 80oC cut-off
Can be charged at a tested/proven 4.14A rating: Yes, 4.14, as in FOUR POINT ONE FOUR. It is possible, tested, proven, and approved
Designed to drive both inefficient and power-demanding devices to help get to where you need to
Utilizing the DS (2x Stripping) process; resulting in an effective method of consistent performance
As all cells, it too is enabled with the OLC for swift understanding of capabilities
Built with the refined bitumen Poly Seal to secure the consistency of repeated operation
2nd Gen Cathode Tag integration to promote reduction in internal resistance
3015mAh | 22.1A CDR | 31.5A @ 80oC cut-off
Wattage output up 5% to 63W; Amperage up 6.8% to 22.1A CDR; Capacity up 7.4% @ >15A loads
Designed to feed power-hungry devices without having to swap batteries every other minute
Chemistry enhanced by QSP (quad stripping process), which is proven to deliver greater voltage-sag resistance
Exceeds all previous designs and chemistry results with greater amperage and capacity
A multitude of processes conducted to achieve documented specs
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
Updated Poly Seal: Enhances security of seal & proper operation
Anti-Counterfeit ‘Ohm’ embossed top to stop knock-offs/clones
NEW Mn bonding process that achieves greater purity: Cycle Life is increased to over 70% nominal average of original capacity
NEW QSP NiCo Meld over 10kHz: process increases charging rate to 4.43A from previous 4.25A
Production date coding now on every cell (applicable to Grown2)
UPDATED bonding process that achieves greater end-product purity: Cycle Life @ 80% nominal average of original capacity
4244mAh | 30.3A CDR | 41.1A 80oC cut-off
Can be charged at a tested/proven 5.30A rating: Yes, 5.30, as in FIVE POINT THREE. It is possible, tested, proven, and approved
Designed to feed insanely power-hungry devices without having to swap batteries every other minute
Now utilizing our latest Li-NMC chemistry with QS (4x Stripping) process; resulting in our purest chemistry to date
Exceeds all previous designs and chemistry results with greater CDR running at 8oC cooler than previous model
Updated Poly Seal: Enhances security of seal & proper operation
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
3116mAh | 30.7A CDR | 41.6A 80oC cut-off
Can be charged at a tested/proven 4.67A rating: Yes, 4.67, as in FOUR POINT SIX SEVEN. It is possible, tested, proven, and approved**
Originally developed and intended to power automobiles, it has been reformulated and equipped with a proprietary EPTC ring
Not reinvented, rather RE-formulated, achieving a unique blend new to Hohm Tech International
Since date of release, cell progression is up in all amperage and safety tests
EPTC (Enhanced Positive Thermal Coefficient) equipped: Reduction in Thermal Runaway potential
Updated Poly Seal from inception: Enhances security of seal & ensures it excels in various applications and environments
As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression
Ahead of schedule chem bonding to Li-Mn specifications
NEW bonding process that achieves greater purity: Cycle Life is increased to 69% nominal average of original capacity
CoO2 coalesce process unlocks 1.5C charging rates
World’s First NAI 20700 (non automotive intent) extended with a backing of LLI, GLI, and PLI for robust protection from start to finish
Proprietary “Ohm” cap to ensure utmost authenticity!
QSP process that achieves greater end-product purity: Cycle Life 73% @ 500 cycles of nominal average capacity
QSP Li-NMC | 39.1A-49.5A | 3023mAh | 3.6V
Can be charged at a tested/proven 5.29A rating: Yes, 5.29, as in FIVE POINT TWO NINE. It is possible, tested, proven, and approved
Purpose-built to exceed amperage capabilities of ALL previous non-QSP batteries
Utilizing our latest QSP Li-NMC processed chemistry; resulting in the purest chemistry to date
39.1A CDR runs from 4.2V down to 2.5V @ under 76oC MAX (Neware Analyzer | Palmer Probes | 22-25oC Ambient | No Moving Air)
Utilizing the proven compound in updated Poly Seal: Enhancing security of seal & proper operation
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
QSP Li-NMC | 30.3A-38.6A | 4007mAh | 3.6V
Can be charged at a tested/proven 6.01A rating: Yes, 6.01, as in SIX POINT ZERO ONE. It is possible, tested, proven, and approved**
Development started in 2017 with intent to only power Electric Vehicles. It’s just too good to keep it restricted to only EV projects
Using the proprietary “Ohm” cap in a 21.5mm width; 71.4mm length structure. 100% blend new to Hohm Tech International
>4k capacity, >30A load, in a structure under 72g weight!
Utilizing same identical seal compounds as Hohm RUN to ensure battery remains sealed in hot/cold weather and applications
As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression
QSP Li-NMC with ample cobalt is proving to be desirable to other factories that Hohm Tech International is now licensing the technology to
NEW bonding process that achieves greater purity: Cycle Life is increased to >70% nominal average of original capacity
QSP unlocks consistent and reliable 1.5C charging rates
World’s First NAI 21700 (non automotive intent) cell in compliance of ATD & ANSI, while achieving IEC certification
