HOHM WORK2 18650

(2 Pack)

Rated 4.67 out of 5 based on 3 customer ratings
3 customer reviews

Price : $24.99 & FREE Returns  

Share

FacebookTwitterPinterestEmail

Capacity: 2576mAh
Max Charge Rate: 3.86A
Continuous Discharge Rate: 24.7A
Pulse | Peak*6: 41.3A
Max Safe Cut-Off: 2.5V
Cycle Life Retention: 500 Cycles (67%), 1000 (57%)
Chemistry Type: Li-CoO2C INR Foundation
Spec. Sheet in Download Center: Yes

9999935 in stock

QTY

Share

FacebookTwitterPinterestEmail

Frequently bought together

++
Total price:   $90.97
Category:

Description

Say hello to the successor of the Hohm Work 18650…we proudly introduce you to the Hohm Work2. Phenomenal sustained amperage and voltage delivery under heavy load in a 18650 (18mm x 65mm) cell.  These are rated by Indonesia Chemistry at 2576mAh capacity, with a CDR of 24.7A and a pulse/peak rating of 41.3A*6.  All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr*1, TID*2, PVDL*3, CLR*4 mΩR*5, and Temperature (°C). Hohm Work2 is built with CoMn chemistry concentration, with manganese inert compounds replaced with proprietary levels of cobalt oxide and raw graphite to achieve unprecedented capabilities.

 

Every Hohm Tech cell model has been tested and certified by the rightful authorities/laboratories and accredited entities to achieve certification of MSDS, CE, ROHS, UN38.3, Specifications, Air/Sea Transport, and PLI.  We do not cut corners. We deliver what we promise… chart topping performance, capacity, consistency, and safety.

 

These cells are built specifically for intense & power-hungry devices that require consistent amperage delivery to operate as intended. Not only was power & capacity a priority, but safety measures were at the forefront of it all.

 

To expound on safety:

 

‌• modified cathode tag consisting of higher purity aluminum is utilized to aid with lowering internal resistance

‌• updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled

‌• each cell is fitted with our proprietary EPTC (Enhanced Positive Thermal Coefficient) ring with higher multiplier of resistance.

‌• every cell equipped with 2-stage CID (Current Interrupt Device) system to aid in overcharge prevention

 

* NOTICE: Hohm Tech does not manufacture batteries. These are licensed and made specific to the requirements set forth.
** CAN BE CHARGED AT 3.86A.  This is not a misprint.  3.86A as in THREE POINT EIGHT SIX amp charging is possible, tested, proven, and approved within all strict safety protocols set by Indonesia Chemistry.
*** TESTING BEYOND TEMPERATURE. Hohm Tech cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, internal resistance spread pre|post, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.

 

*1 Density Loss Ratio

*2 Thermal Image Distribution

*3 Pulse Voltage Drop Limitation

*4 Cycle Life Retention

*5 Resistance Retentivity Pre/Post

*6 Pulse & Peak is applicable to Dynamic EV Systems @ ≤5 SEC ON / ≥30 SEC OFF

 

WARNING: Know your battery warning & safety information

Consult a certified lithium ion specialist or certified battery pack assembler if there are any uncertainties or questions on the use of, handling of, installation of, or storage of lithium ion batteries. Consumer safety is of utmost importance.

 

  • KEEP OUT out of reach of children and pets.
  • DO NOT store or carry batteries unprotected.
  • DO NOT use lower resistance (Ω) # OR exceed any cell limitation as indicated on cell.
  • DO NOT use in device that allows batteries to touch that are facing opposing directions (risk severe burn injury and explosion).
  • DO NOT install, use, or charge backwards or improper configuration.
  • DO NOT use a battery that has ANY dents, tears, punctures, or any other damage at all to its structure or outer label wrapping (risk severe burn injury). Inspect each battery carefully before use. This ensures safe, reliable, consistent operation, and functionality.
  • DO NOT use if hot to touch. Risk severe burn injury and explosion.
  • DO NOT charge over 4.2v or discharge below specified cut-off volts.
  • Lithium ion batteries have inherent risks that can cause severe burn injury, fire, explosion, and battery failure if not handled and used in accordance to an application’s power requirements and/or within the battery capabilities. Read specification sheets’ cautions, warnings, and prohibitions (available in Download Center of this site).

Additional information

Weight 4.16 oz
Dimensions 2.85 × 1.72 × .90 in
  1. Rated 4 out of 5

    from Ogden, UT

    Great battery haven’t had any issues

  2. Rated 5 out of 5

    from New York, NY

    I got a little scientific and tested with an old analog DC/AC converter. I ran 3 of them to make the 12V requested input power. I was freaking blown away that the batteries actually powered it at I was able to use a 110V, 60W solder gun for over 5 minutes. I tried this with 3 LG HE4 cells, the converter shut off soon as I powered on the solder gun. I’m impressed.

  3. Rated 5 out of 5

    from Fernandina Beach, FL

    Takes me 2 full days before having to recharge with repeated use at 70 watts. Now wish I only bought 1 with them lasting this long.

Add a review